The GMFC-T2 series mass flow controller is an intelligent, high-precision gas flow controller product designed for industrial special gas applications. This product uses high-speed sampling processing technology and digital compensation algorithms, and is equipped with imported Electromagnetic proportional valve, 316L stainless steel gas circuit seat, high-precision flow sensor, etc., have the characteristics of high accuracy, fast response speed, and good stability. In terms of output, it has an industrial-grade LCD touch screen with functions such as flow setting, instantaneous flow and cumulative flow display. The output signal can be selected: 4-20mA and 0-5V analog signal, and RS485 and other digital communication methods
LCD touch display and control
The typical measurement accuracy of this series of products is ± 1.0%,
and the range ratio is better than 500:1.
The range of this series of products is
optional from 50sccm to 10slm (other ranges can be customized)
Advanced MEMS flow sensor chip and the aviation aluminum
polished gas flow channel,suitable for air, nitrogen, argon,
carbon dioxide, helium, hydrogen, methane, oxygen, etc.
Detection of a variety of clean and dry gases.
The flow range of the miniature gas mass flow controller is the
same as that of the flowmeter, the valve control range ratio
is 1;100, and the proportional control valve accuracy is 1.0%.
Comprehensive application of aviation aluminum, light weight,
High strength.
The base is made of 316 stainless steel and the shell is made
of aluminum alloy
Analog signal: 4-20mA(Linear corresponding range);
0-5V (Linear corresponding range);
Digital signal: RS485(Default Modbus-RTU, private protocol
can be customized).
Mass Flow Controller (Mass Flow Controller) is an intelligent, high-precision gas flow controller product designed for industrial special gas applications. This product uses high-speed sampling processing technology and digital compensation algorithms, and is equipped with imported electromagnetic proportional valves, 316L stainless steel gas circuit seat, high-precision flow sensor, etc., have the characteristics of high accuracy, fast response, and good stability. In terms of output, it has an industrial-grade LCD touch screen with functions such as flow setting, instantaneous flow and cumulative flow display. The output signal can be selected: 4-20mA and 0-5V analog signal, and digital communication methods such as RS485.
Insensitive to temperature and pressure
Excellent zero point stability
Super fast response speed
Good repeatability and reproducibility
Multiple signal output methods
LCD touch display and control
Equipped with high-end imported proportional solenoid valve
Environmental conditions
Operating temperature：0~50℃
Working humidity：10%~90%RH(No icing, no condensation)
Work pressure：0~1MPa
Storage temperature：-20~85℃
Electrical parameters
Supply voltage：DC24V，Ripple ≤50mV
Power consumption：＜3.2W(With screen)
＜2.4W(With screen)
Start Time：<1S
Preheat time：<10mS
Communication Interface
Analog signal (current, voltage)
Current signal：4-20mA (Linear corresponding range)
Voltage signal：0-5V (Linear corresponding range)
Analog signal：RS485
Digital signal (RS485)
Interface Type D-SUB 9pin
Communication rate 4800,9600(default),14400,19200,38400,56000,57600,115200,
128000,230400,256000,460800,500000（Can be modified by command or host computer）
protocol RS485（Default Modbus-RTU, private protocol can be customized）
Device address：1 (default)-250 (can be modified by command or host computer)
Maximum number of nodes 250
Mechanical parameters
Connector type:Ferrule: 8mm, 12mm, 3/8 inch, quick plug: 6mm, 8mm, other optional
main body material:Base: 316L stainless steel, shell: carbon steel
Seal material :FKM Viton
weight:1.1 kg
